Traceur HP Designjet 500 erreur 79:04

Espace de discussion entre techniciens

Modérateurs : Jo, Konicaman

Répondre
Avatar du membre
simon
BEPC
BEPC
Messages : 152
Enregistré le : jeu. 04 août 2005 00:00
Localisation : lyon

Traceur HP Designjet 500 erreur 79:04

Message par simon »

Bonjour,

J'ai un code 79:04 sur un traceur HP 500 C7770B.

Si quelqu'un connait une solution !!!!

Merci d'avance
Avatar du membre
David_C
Admin King of Master suprême du copieur
Admin King of Master suprême du copieur
Messages : 2364
Enregistré le : mar. 04 juin 2002 00:00
Localisation : Annecy
Contact :

Message par David_C »

Google et HP sont tes amis :

System error 79:04
Explanation
Miscellaneous firmware error.


http://h41186.www4.hp.com/country/fr/fr ... seq=275423
Francotech.net est un site communautaire réservé aux professionels.

Pas de question technique par MP, je ne réponds pas





David.C
Avatar du membre
iori30
Certificat d'Etude
Certificat d'Etude
Messages : 51
Enregistré le : mar. 31 oct. 2006 00:00

Message par iori30 »

System Error: 79:04
Problem
Description:
Firmware Error.
Corrective Action: Try the following:
Switch the Printer Off and wait a few minutes. Switch the Printer
On again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
If the new Firmware release does not solve the problem, or if new
Firmware release was not available, then contact the HP
Response Center (or directly to the Division) supplying the
following information:
? Model and Serial Number of the Printer.
? Firmware release of the Printer (use the Printer Information
utility ⇒ Page 4-26).
? The complete Error Code information, including the linefeed
where the error occurred (use the Error Log utility to obtain this
information ⇒ Page 2-5).
Avatar du membre
simon
BEPC
BEPC
Messages : 152
Enregistré le : jeu. 04 août 2005 00:00
Localisation : lyon

Message par simon »

Merci pour vos informations.
J'ai mis à jour le firmware, changé deux têtes d'impression périmé depuis 2002 et la machine est reparti.
Répondre

Qui est en ligne

Utilisateurs parcourant ce forum : Ahrefs [Bot] et 14 invités