est il possible de faire un reset sur copieur minolta ep2130

[roco]

je suis rendu a 19000 copie et la lumiere clignote est il possible de faire un reset pour rendre les compteurs a zéro

[David_C]

Les unité tambour sont donnée à 20k copies par le constructeur.
C'est "écrit" dans un compteur electronique qui ce remet à zéro lors de l'insertion d'une nouvelle unité image via une 'sorte de fusible'.

[typewriter]

EP2130/2130PRO
IU reset procedure
1) Remove toner bottle from machine.
2) Turn OFF machine then jumper pins 3 and 5 on PJ3A on the Aboard at the back of the machine with a 1/16 amp
picofuse. (You may want to bend the ends of the wires on the fuse to help it stay put)
NOTE DO NOT USE ANYTHING OTHER THAN A 1/16 AMP PICOFUSE TO DO THIS. (KATUN PART # 010515)
3) Open the Copier Clamshell upwards, Then cheat the front door interlock switch. Relace the Image Unit and pull it out about 2 inches.
4) (a) With the clamshell still open turn the machine ON when warmup is complete Initialization will start. (b) After the auto initilization has started WAIT until the SECOND ZERO has flashed on the display. Then immediatly insert the image unit the rest of the way into the machine. While the machine is still cycling close the clamshell.
5) Only AFTER the completion of the initilization remove the fuse if it was sucessful the fuse will be open. If the fuse has not opened repeat the above procedure.