RICOH FT 1008

Répondre
Avatar du membre
manou
CAP
CAP
Messages : 393
Enregistré le : lun. 30 août 2004 00:00
Localisation : algerie
Contact :

RICOH FT 1008

Message par manou »

E 52 SUR FT 1008 MERCI
Avatar du membre
reptec
Certificat d'Etude
Certificat d'Etude
Messages : 32
Enregistré le : ven. 18 août 2006 00:00
Localisation : 47

Re: RICOH FT 1008

Message par reptec »

E52: Fusing Error 1
- Definition -
· The temperature detected by the thermistor does not reach 100°C within 15
seconds after the main switch is turned on.
- Possible Causes -
· Defective fusing thermistor
· Fusing lamp open
· Defective power supply board
· Defective main control board
· CN118 on the main control board or CN404 on the power supply board is not
correctly connected
Avatar du membre
electron
BEPC
BEPC
Messages : 119
Enregistré le : mar. 19 déc. 2006 00:00

Message par electron »

comme à dit reptec controle d'abord tous les éléments qu'il a cité. Si correcte alors fait le reset avec le code 97 en mode sav.

Courrage à toi.
Electron TOUJOURS AU COEUR DES GRANDES SOLUTIONS.....................
Avatar du membre
manou
CAP
CAP
Messages : 393
Enregistré le : lun. 30 août 2004 00:00
Localisation : algerie
Contact :

ricoh 1008

Message par manou »

merci reptec et electron c'est regle
Répondre

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 3 invités