RICOH FT 1008
RICOH FT 1008
E 52 SUR FT 1008 MERCI
Re: RICOH FT 1008
E52: Fusing Error 1
- Definition -
· The temperature detected by the thermistor does not reach 100°C within 15
seconds after the main switch is turned on.
- Possible Causes -
· Defective fusing thermistor
· Fusing lamp open
· Defective power supply board
· Defective main control board
· CN118 on the main control board or CN404 on the power supply board is not
correctly connected
- Definition -
· The temperature detected by the thermistor does not reach 100°C within 15
seconds after the main switch is turned on.
- Possible Causes -
· Defective fusing thermistor
· Fusing lamp open
· Defective power supply board
· Defective main control board
· CN118 on the main control board or CN404 on the power supply board is not
correctly connected
ricoh 1008
merci reptec et electron c'est regle
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 6 invités